For 38 years, Sabre has been integrating PLCs, DCS panels, RTU Panels, Purge Panels, Power Distribution Panels, and Custom Enclosures. The team has evolved into custom switchgear manufacturing, protection and controls, skid-mounted electrical equipment integration, and mobile substations. A growing group of strong, passionate professionals is positioned to provide the equipment you need throughout the energy transition and beyond.
The VFD Panel, also known as the VFD Control Panel, is designed to control the speed of an electric motor. Sabre’s custom VFD packages are built with vendor-neutral components, delivering high-quality and quick turnaround solutions. On-site installation and commissioning are also available.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Breaker or Fused Disconnect
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
Simplifies old or new systems by providing field IO in a safe and accessible location. Sabre designs custom marshalling cabinets to reduce clutter and improve efficiency.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
Control panels for managing electric motors, lighting systems, and other power-consuming devices in industrial and commercial settings.
Soft Starters decrease load and torque during startup to reduce wear and tear on motors. Sabre builds vendor-neutral, fully tested packages with on-site installation and commissioning.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Breaker or Fused Disconnect
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
Specialized enclosures for housing and organizing networking equipment, servers, and electronic devices essential for communication and data management. Sabre ensures proper cable management to minimize clutter, prevent damage, and simplify maintenance.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
Electrical junction boxes serve as protective containers for connections, facilitating wire distribution and routing.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
PLC (Programmable Logic Controller) panels house terminals, fuses, relays, switches, and CPUs. Sabre works with leading manufacturers such as Allen Bradley, Siemens, Honeywell, and Schneider to deliver reliable solutions.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
It’s designed to monitor and protect electrical systems, making sure they operate correctly. It helps maintain control and prevents damage to important infrastructure by detecting faults or abnormal conditions.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and
- Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Breaker or Fused Disconnect
Photovoltaic (PV) combiner boxes are essential in solar power systems, particularly in large-scale setups. They act as a central hub where the output wires from multiple solar panels are brought together and combined into a single output. This helps simplify the wiring, improves safety, and allows for easier system monitoring and protection.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and
- Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Breaker or Fused Disconnect
The VFD Panel, also known as the VFD Control Panel, is designed to control the speed of an electric motor. Sabre’s custom VFD packages are built with vendor-neutral components, delivering high-quality and quick turnaround solutions. On-site installation and commissioning are also available.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Breaker or Fused Disconnect
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
Simplifies old or new systems by providing field IO in a safe and accessible location. Sabre designs custom marshalling cabinets to reduce clutter and improve efficiency.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
Control panels for managing electric motors, lighting systems, and other power-consuming devices in industrial and commercial settings.
Soft Starters decrease load and torque during startup to reduce wear and tear on motors. Sabre builds vendor-neutral, fully tested packages with on-site installation and commissioning.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Breaker or Fused Disconnect
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
Specialized enclosures for housing and organizing networking equipment, servers, and electronic devices essential for communication and data management. Sabre ensures proper cable management to minimize clutter, prevent damage, and simplify maintenance.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
Electrical junction boxes serve as protective containers for connections, facilitating wire distribution and routing.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
PLC (Programmable Logic Controller) panels house terminals, fuses, relays, switches, and CPUs. Sabre works with leading manufacturers such as Allen Bradley, Siemens, Honeywell, and Schneider to deliver reliable solutions.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
It’s designed to monitor and protect electrical systems, making sure they operate correctly. It helps maintain control and prevents damage to important infrastructure by detecting faults or abnormal conditions.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and
- Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Breaker or Fused Disconnect
Photovoltaic (PV) combiner boxes are essential in solar power systems, particularly in large-scale setups. They act as a central hub where the output wires from multiple solar panels are brought together and combined into a single output. This helps simplify the wiring, improves safety, and allows for easier system monitoring and protection.
Available Options:
- Built to CSA, UL, and cUL Standards
- UL 508A & CSA C22.1#14
- Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and
- Hazardous (Classified) Locations
- Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
- NEMA Ratings: 1, 12, 3R, 4, and 4X
- Voltage Options: 24VDC, 120VAC, 240VAC, 480VAC, 600VAC
- Materials: Mild Steel, Aluminum, Fiberglass, Stainless Steel
- Insulated Options
- Top or Bottom Cable Entry
- Breaker or Fused Disconnect
